Showing posts with label Transfers. Show all posts
Showing posts with label Transfers. Show all posts

Sunday, 4 May 2014

Finished Manticore and Leman Russ tanks

I've gradually been working my way through the pile of tanks I acquired recently, and with the release of the new Astra Militarum Codex I've been feeling motivated to get some more stuff off my painting table.  I'm now at the half way point with some more Leman Russ, several Chimera and a Hellhound remaining to do, not to mention the trio of Valkyries that need detailing.  So without further ado, here are some pics of the finished tanks.




The basic camouflage pattern is Castellan green airbrushed over a black primer, the model is then masked with normal masking tape taking care to ensure the paint underneath has cured completely (otherwise the tape can lift the paint, although sometimes this can make for a neat paint peeling effect).  The camo pattern is then completed with P3 Hammerfall Khaki.  Once the masking tape is removed I weather the vehicle with Agrax Earthshade and also an oil paint wash made from Burnt Umber and white spirit, although I am tending toward the GW wash as it is less smelly and alsmost as good in this application.  Paint chips are sponged on where damage might occur, then edge highlights are applied using Gretchin green and Kommando Khaki to help the model pop on the gaming table.  Transfers are applied over a gloss varnish, and when they are dry I distress them with the end of a needle file or scalpel, if i didn't do this the transfers would look far too fresh compared to the rest of the vehicle.  Details are then added- lenses, skulls etcetera.  If the vehicle has a name plate I write this in using a 0.25mm Rotring Isograph technical pen with indian ink, my hand isn't all that steasy but the results look okay.  My two Manticores are named 'Inductor' and 'Perditrix' which translate loosely as 'Persuader' and 'Destroyer'


To finish the model is given a coat of Vallejo Matt Polyurethane Varnish, which is probably the best varnish I've used so far.  All of the vehicles are fully magentised with swappable weapons, it's also nice to remove to remove the manticore Missiles as there are used in a game, it beats counting!


Friday, 28 March 2014

Hydra Flak Tank

It's been a busy few months with work but I've managed to shoe-horn in a few games of X-Wing and spend some hours getting a bunch of Imperial Guard tanks up to tabletop standard.  I was going to leave them at that but the acquisition of the Forgeworld Model Masterclass books got me doing crazy experiments with white spirit, bandagaes, artists pastels and florists wire.... don't ask!  I do highly recommend these books, they've helped me raise my game and even won me a GW voucher for a 'best painted' army at a local tournament, so this hobby can pay, well kind of.
The Model Masterclass books are full of inspiring projects and lots of solid advice on techniques, materials and equipment so they are money well spent, in fact they are a bargain when you consider the cost of wargaming models and the ease with which one can wreck them with poorly executed  model making and painting, I've definitely been there.
The Hydra is 95% finished, just a few details to do and a coat of matt varnish and she's good to go, although I'm already thing I need another two thanks to the preponderance of Necron flyers at my local gaming club.  The camo paint scheme was airbrushed over a black base coat letting the black show through in the recesses, I then applied a wash of burnt umber oil paint diluted in white spirit.  This gave me the tabletop scheme as originally intended, but then I weathered further with sponged on paint chips, powdered pastels and selective line highlights to bring the model up and help it 'pop' a bit.  That said I always seem to be a bit conservative when it comes to highlights so i might apply another level.
The transfers came off Games Workshop transfer sheets, when dry I distressed them with the end of a needle file so they look worn just like the rest of the tank.

Tuesday, 12 November 2013

Crimson Fists Land Speeder

I decided to finish this item that has been sat around for a while.  It started life in my younger bro's Black Templars army and it had a pretty thick layer of black spray primer on it which I removed by putting the model in a bath of brake fluid for a few days.  Consequently the surface is puckered where the solvents ate into the plastic, but for a free fast attack choice I can't complain.  I think I'll pair this up with a tempest to make a nice anti-tank reserve choice.


I gently sponged on grey paint on edges and vulnerable areas to simulate paint chips, and chainmail to a lesser degree on extreme edges where paint would be totally removed.

The transfers were applied over a brush painted gloss varnish- you only need to do the part that will be covered by the transfer.  They all had Micro-Sol applied to help the transfer to the surface, on the shoulder pads this took something like 15 applications over a few days so it takes patience, but the end results are worth it as the markings really add to the overall effect.

Friday, 1 November 2013

Crimson Fists Sternguard test mini

Good evening, another productive week on the painting front and hopefully I'll have a squad of my new Sternguard to field at gaming club tomorrow.  I intend to airbrush the basecoat on the Sternguard because it's a lot quicker and I'm starting to feel more confident using the airbrush.  However I painted up one 'test' piece this evening using brushes to check it all hangs together.  I've gone for a white helmet on my veteran, which seems different to the consensus when it comes to Crimson Fists- just do a Google image search of CF Veterans and you'll see for yourself.  I've made the call to give my vet's white helmets, because it looks cool and will help set them apart from their comrades in the battle companies, and of course the Crimson Fists are adherents of the Codex Astartes too (more or less)...

A little added bling in the form of gold edging on the pauldrons and a splash of gold on the weapons will help bridge the gap between my standard troops and the much, much blinging Master Pedro and Captain Jorge.



The whole helmet off thing strikes me as a little crazy fluff wise since it makes a 8 foot tall walking tank into a soft target.  If I was a chapter master then any marine taking his helmet off during battle would be busted back to the scout company.  That said, artistic licence and all, I get to paint a cool beard and the odd bare headed marine looks good on the table, maybe his autosenses have gone wrong and the adeptus mechanicus are too busy figuring out how to wire a plug.

I'm waiting on my Forgeworld transfer sheet, my first tactical squad and my terminators have freehand insignia that look ok, but they were done at serious cost to my sanity.  My previous endeavours with transfers are mixed, so I've ordered some stuff called Micro-Sol which apparently will make life a lot easier and the transfers will look good... we will see.

I also need to find a new lacquer after having a minor disaster with Testors Dullcote, which started dissolving the paint on my newly completed drop pod, luckily i noticed quickly and was able to fix the damage but I'm trying to get to the bottom of the Dullcote issue which prior to the Drop Pod debacle has been excellent for protecting my minis.... I've got two pots of Vallejo acrylic varnish on order, varnish is not as durable as lacquer but i think also less likely to dissolve my paintwork.